MAGIS M 4-6 - IMMERGAS
MAGIS M4-6 – IMMERGAS
Single-phase inverter version available for models from 4 and 6 kW, with monobloc reversible air-to-water heat pumps.
A range of inverter-driven air-to-water hydronic heat pumps, available in the models MAGIS M4 and MAGIS M6, designed to meet the heating and cooling needs of new residential buildings, offices, shops, and more.
The heat pumps can be used as the sole generator for the system (allowing for simple cascade installations of up to 6 units), thanks to built-in electronics. With a control panel, it's possible to manage thermal systems divided into two zones with different temperatures.
These are system solutions where multiple generators can be fully integrated with each other, enabling maximum benefit from different energy sources based on their individual efficiency parameters.
For all MAGIS M models, Immergas offers an “intelligent” system manager capable of identifying the most cost-effective energy source at any given time and selecting the appropriate unit to activate.
ADVANTAGES:
High energy efficiency
Greater comfort
Minimal environmental impact: preloaded with low-GWP R32 ecological refrigerant
Easy to install
System design flexibility
Greater comfort
Minimal environmental impact: preloaded with low-GWP R32 ecological refrigerant
Easy to install
System design flexibility
AVAILABLE MODELS:
MAGIS M4
MAGIS M6
MAGIS M6
MAGIS M4-6 Electronics preconfigured to:
Directly manage 2 zones and their respective circulators
Manage domestic hot water (DHW) production
Control the activation of any auxiliary electric resistances, both for the heating system and DHW
Manage a solar thermal system
Control the anti-legionella function and manage a recirculation pump
Include an input to force activation via photovoltaic system and a contact for Smart Grid function/signal
Include a SILENT MODE to reduce sound emissions
Include anti-freeze protection down to -25 °C
Connect to the system manager
Ensure an electrical insulation rating of IP24
Technical Data:
Power supply: 13.5 Vac (directly from the heat pump terminal block)
Cable connection: 5-core cable (type H03VV-F 5 x 0.75 mm²), max. length: 50 m
Directly manage 2 zones and their respective circulators
Manage domestic hot water (DHW) production
Control the activation of any auxiliary electric resistances, both for the heating system and DHW
Manage a solar thermal system
Control the anti-legionella function and manage a recirculation pump
Include an input to force activation via photovoltaic system and a contact for Smart Grid function/signal
Include a SILENT MODE to reduce sound emissions
Include anti-freeze protection down to -25 °C
Connect to the system manager
Ensure an electrical insulation rating of IP24
Technical Data:
Power supply: 13.5 Vac (directly from the heat pump terminal block)
Cable connection: 5-core cable (type H03VV-F 5 x 0.75 mm²), max. length: 50 m
Minimum wire section: 0.5 mm2
Maximum wire section: 1.5 mm2
Control panel protection rating: IP20 (for indoor use only)
Energy Efficiency Class: Heating at 55 °C: A++
Energy Efficiency Class: Heating at 35 °C: A+++
Refrigerant Gas: R32, low-GWP refrigerant
Maximum wire section: 1.5 mm2
Control panel protection rating: IP20 (for indoor use only)
Energy Efficiency Class: Heating at 55 °C: A++
Energy Efficiency Class: Heating at 35 °C: A+++
Refrigerant Gas: R32, low-GWP refrigerant